上海翻译公司完成大自然介绍英文翻译

EXTRUSION OF FRC PRODUCTS

TECHNOLOGY

AND

PRACTICAL ASPECTS

 

 

HÄNDLE GMBH · MASCHINEN UND ANLAGENBAU · MÜHLACKER/ GERMANY

 

3eTECHNOLOGY

FOR

 

FIBER-REINFORCED CONCRETE

(FRC)

 

• PANELS

• FLOOR PLANKS

• DOOR JAMBS

• TRIMS & SPECIALS

 

Typical FRC extruded profiles using 3e Technology

 

3e - What does it mean?

e - for ecology

clean, environmental-friendly

e - for extrusion

hollow-core lightweight products, high output rates

€ - for €conomy

low capital investment and production costs

 

FRC Production Process

3e Technology

 

• Raw material dosing

• Weighing

• Batch Mixing (dry & wet)

• Continuous proportioning

• Extrusion

• Handling (wet side)

• Curing

• Handling (dry side)

 

• Grinding (if needed)

• Cut-to-length

• Strapping & storage

 

Material Compositions

The 3e Matrix can be made up of a combination

of different materials, e. g.

• cement, limestone powder, flyash

• fibers (a.r. glass fibers, cellulose and other natural or man-made fibers)

• silica, mica

• water

• additives

Händle can determine the ideal matrix by tests in lab and pilot plant.

 

3e Technology - The Händle Expertise

 

We assist in finding optimum composition by extensive lab extrusion tests, using clients‘ raw materials....

 

3e Technology - The Händle Expertise

 

... and in our pilot plant set-up by semi-industrial production runs

 

3e Technology - Production Part of dosing & weighing plant

 

3e Technology - Production

 

Dosing, weighing and mixing plant

 

 

3e Technology - Production

 

Overall view of dosing & mixing section

 

 

3e Technology - Production

 

Use of waste paper to produce cellulose fibers

 

3e Technology - Production

 

Pugging, Mixing & Extrusion

 

3e Technology - Production

 

Continuous Extrusion (single auger version)

 

3e Technology - Production

 

Continuous Extrusion using twin-auger machine (for wider panels)

 

3e Technology - Production

 

Continuous Extrusion of 2 columns (Special application profiles)

 

3e Technology - Production

 

Panels pre-cut to 6 m length

 

3e Technology - Production

 

Wet panels handled onto trays

 

3e Technology - Production

 

Semi-automatic handling & stacking process - entrance into curing tunnel (air curing)

 

 

3e Technology - Production

 

 

3e Technology - Production

 

Gang Saw

(cut to final length)

 

3e Technology - Production

 

Removal of panel stacks, strapping

 

3e Technology - Production

 

Indoor/ outdoor

storage - for final curing

 

 

3e FRC Product Properties

Specifications of typical 3E FRC Panel

Weight: 50 - 75 kg/m²

Compressive Strength: 15 - 20 N/mm²

Fire Resistance: 240 Minutes (Integrity)

Sound Insulation: 37 db (1000 Hz)

Water Absorption: 13 % (by weight)

Thermal Conductivity: 0,50 w/m.C

 

Pull-Out Test:

(using 18 mm hole diameter fixed with chemical anchor)

 

28,3 KN (pull-out load)

 

FRC 3e Panel Properties

 

FAST Quick installation, use of standard tools and techniques, easy service installation in vertical cores

As a result of hollow core profile, easy handling on

 

LIGHT

 

STRONG

 

site, reducing overall weight of construction

High loadbearing capacity and tensile strength, combined with non-combustibility

 

 

Reduced building costs due to low material costs, minimum waste and speedier construction with fewer trades

CLEAN Panel installation virtually dry, due to surface smoothness no need for surface rendering, precise

cut-to-length from factory

 

ENVIRONMEN- TAL-FRIENDLY

 

Minimum noise, dust and construction waste, use of recycled materials in manufacturing process.上海翻译公司完成大自然介绍英文翻译